Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Irving, TX | Flint Chimney Co Dallas
We provide independent HeatShield service across Irving, including Cerfractory flue sealant application, Joint Repair System work, and a Chimney Sweep - Irving for HeatShield-protected flues. What makes our HeatShield work different in Irving is the housing stock: decades of sporadic wood burning in 1960s-1980s brick veneer homes means we’re usually cleaning heavily glazed creosote before we ever touch the coating. Call (361) 492-4099 for a written estimate on HeatShield chimney cleaning or resurfacing in Irving.
Why Irving Residents Choose Us for HeatShield Service
HeatShield isn’t a product you want a general handyman guessing at. The Cerfractory flue sealant and Joint Repair System have specific application requirements, cure windows, and failure modes we’ve learned by working on hundreds of Irving flues. Hank Delano and our crew have been inside enough 1970s and 1980s chimneys in this city to know what a clay tile liner looks like after forty years of North Texas clay soil shifting underneath it. We use genuine HeatShield materials from the manufacturer’s distribution network, not generic refractory mortar, and we’re part of the Garrison Partners family founded in 2002. Every HeatShield job gets a written price before work starts, and every repair carries a 365-Day Done Right Promise in writing, good for a full year. If a covered repair fails, we return at no charge, no argument. You’ll know exactly who’s on your roof, too, because our technicians are background-checked, uniformed, and dispatched on every call. A live person answers our phone 24/7, not a voicemail tree.
Styles & brands we work with
Common HeatShield Chimney Cleaning Problems We Solve in Irving
- Cerfractory debonding from freeze-thaw cycles. Irving’s humid subtropical climate brings winter freeze-thaw swings that widen existing flue cracks. When HeatShield Cerfractory was applied over a clay tile liner that already had hairline fractures, the coating can lift away from the tile as the crack opens and closes. We clean the flue fully, assess the bond, and repair or reapply only where the substrate is stable.
- Glazed creosote hiding behind Cerfractory in seldom-used fireplaces. A lot of Irving homes in Valley Ranch and Las Colinas didn’t burn often enough for creosote to flake off naturally. What builds up is a hard, shiny glaze. If moisture gets behind the HeatShield coating through a hairline crack, creosote acids sit against the masonry and corrode it from behind. Our cleaning process removes the glaze first, then we address the coating.
- Joint Repair System seal failure from expansive clay soil. Irving sits on expansive clay that moves with moisture. When underlying mortar joints keep shifting, Joint Repair System seals can crack vertically. During a Level 2 inspection, we identify where movement is active. Coating a joint that’s still moving won’t hold. If the masonry is stable, we reapply the joint seal. If not, we say so plainly.
- HeatShield Restore 200 spalling on prefab metal chimneys. Newer Irving subdivisions from the 2000s often have prefabricated metal chimneys instead of masonry. If light surface rust wasn’t removed before Restore 200 application, the coating can spall or flake. We clean the metal liner thoroughly, remove rust down to sound metal, and apply the product only when the surface is properly prepped.
- Bird nests and debris blocking flues assumed to be decorative. Irving’s Valley Ranch and Las Colinas neighborhoods have a high concentration of chimneys that went untouched for over a decade because homeowners assumed they were decorative. When we finally inspect them, we often pull out bird nests, leaves, and other debris before we can even see the condition of the HeatShield coating underneath. That blockage is a carbon monoxide risk we check for on every call.
HeatShield Service in Irving: What Local Conditions Mean for Your Equipment
Here’s the thing about Irving that doesn’t get talked about enough in chimney circles. Valley Ranch and Las Colinas have an unusual number of fireplaces that have been effectively unused since the early 2010s, because homeowners bought these houses and assumed the masonry chimney was a decorative feature. That assumption is common in the Dallas suburbs, but it’s concentrated in Irving in a way you don’t see in Carrollton or Highland Park. The result is that a HeatShield-protected flue in Irving is frequently hidden under a decade of glazed creosote, bird nesting, and sometimes a full blockage. The HeatShield coating itself might be perfectly intact, but it’s invisible until we do a full creosote removal and Chimney Inspection - Irving with camera verification. That’s the order of operations: clean, inspect, document what the camera shows, then decide whether the HeatShield coating needs repair or resurfacing. If the flue’s clear, we’ll tell you. If it’s not, we’ll show you exactly why.
HeatShield Models & Products We Service in Irving
We service the full HeatShield product line: Cerfractory Flue Sealant, Joint Repair System, Restore 100, and Restore 200. The Restore 100 and 200 lines are generally specified for different flue conditions. Restore 100 is used for smaller surface cracks and spalling in masonry chimneys. Restore 200 is for larger voids and for prefabricated metal chimneys common in newer Irving subdivisions. We stock genuine HeatShield materials for faster turnaround on Irving jobs and never substitute generic refractory mortar. If you’re not sure which product your flue needs, we’ll tell you after a camera inspection, not before. Need to understand what HeatShield covers across the region? Our HeatShield sales & service page explains the product line and our independent status in detail.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Irving
A standard chimney sweep in Irving typically runs between $189 and $279 if the flue hasn’t been serviced in a few years. HeatShield Cerfractory resurfacing starts around $1,200 and goes up based on flue height, current condition, and the amount of preparation required. Joint Repair System work is typically in the $400 to $1,200 range depending on the number of joints and whether we need to grind out old mortar first. What drives HeatShield pricing here is the prep. A Valley Ranch chimney with a decade of glazed creosote needs more cleaning time before we can apply any coating. A clean flue from a regularly serviced Valley Ranch home is faster and costs less. Every estimate is written, itemized, and delivered before any work starts. Call (361) 492-4099 for a free estimate on your HeatShield chimney cleaning in Irving.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs — HeatShield Chimney Cleaning in Irving
No, not properly. Cerfractory Flue Sealant needs to bond directly to clean masonry or tile. If the flue still has glazed creosote, the coating won’t adhere, and you’ve paid for a product that fails within a season or two. We remove all creosote glaze first, using a mechanical cleaning process that’s standard for this kind of buildup, then apply the sealant to a properly prepped surface. Call (361) 492-4099 and we’ll quote the full job, cleaning included, so there’s no hidden prep charge.
Freeze-thaw cycles widen existing cracks in clay tile liners, and if the underlying masonry joint is still moving, the Joint Repair System can’t hold. The seal cracks vertically when the joint shifts. That’s why we don’t coat a joint that’s still in motion. We inspect first, identify which joints are stable and which aren’t, and apply HeatShield only where it’ll stay put. If the movement is too severe, we’ll tell you a coating isn’t the answer and recommend the right repair. Call (361) 492-4099 to schedule a Level 2 inspection in Irving.
Often yes, and it can save you from a full rebuild. A Valley Ranch chimney that’s been dormant for ten years usually has glazed creosote, bird nests, or both. Once we remove that debris and inspect the tile liner, HeatShield Cerfractory is frequently the most practical relining option for cracked clay tile. It’s less expensive than a stainless liner and far less disruptive than rebuilding. If the underlying masonry is sound, HeatShield does the job. Call (361) 492-4099 for a free estimate on HeatShield service in Irving.
Yes, but only if the metal liner is properly cleaned first. Restore 200 is designed for metal chimneys, but it requires a rust-free, clean surface. Light surface rust needs to be removed down to sound metal, and flue debris has to be cleared before application. If the metal is severely pitted or the rust compromised the liner structurally, we’ll say so and recommend a different repair path. Call (361) 492-4099 and we’ll tell you what your prefab chimney actually needs.
HeatShield products are designed for the flue, not the firebox. Spalling brick in the firebox itself usually needs tuckpointing, firebrick replacement, or in severe cases, a firebox rebuild. However, if the spalling is in the flue above the firebox, HeatShield Restore 100 can repair surface spalling when the underlying masonry is stable. We’ll assess both areas during inspection. Call (361) 492-4099 for a written estimate on firebox repair or HeatShield resurfacing in Irving.
Service Areas Near Irving
We serve the whole Irving area, including Valley Ranch, Las Colinas, and the neighborhoods around MacArthur Boulevard and Belt Line Road. Our service area also covers Irving service area details and extends into nearby HeatShield service in Carrollton, HeatShield service in Dallas, plus Lakewood, Highland Park, and Duncanville.
Book Your HeatShield Service in Irving Today
Ready to get your HeatShield chimney cleaned or inspected in Irving? Call (361) 492-4099 now. We’ll give you a written estimate before any work starts, and a live person will answer the phone. If you’d rather call later, we’re here 24/7.
Written by Hank Delano, Owner at Flint Chimney Co Dallas, serving Irving since 2002.